pt121 series - radial high q inductors *rohs directive 2002/95/ec jan 27, 2003 including annex specifications are subject to change without notice. customers should verify actual device performance in their specific applications. rev. 09/10 *rohs compliant *rohs compliant 0.90 0.1 (0.035 0.004) dia. recommended pcb layout 5.00 0.1 (0.197 0.004) 5.00 (.197) 10.15 (0.40) 12.70 (0.50) max. max. 0.70 (0.027) dia. heat shrink tube coated 5.00 (0.197) tolerance: 0.25 (0.010) features low cost, high quality excellent temperature stability high currents e12 series 100 h to 33mh open construction rohs compliant* dimensions: mm (inches) electrical specifications (@ 25 c) product dimensions recommended pcb layout electrical schematic measure self part inductance (1) q frequency resonant dcr rated number mh 10 % (ref.) q and frequency ? i dc inductance mhz min. (2) (max.) ma (max.) khz pt12110sl 0.10 80 796.0 5.30 2.0 200 PT12111SL 0.12 80 796.0 4.50 2.0 200 pt12112sl 0.15 80 796.0 3.80 2.0 200 pt12113sl 0.18 80 796.0 3.30 3.0 200 pt12114sl 0.22 80 796.0 2.90 3.0 200 pt12115sl 0.27 80 796.0 2.60 3.0 200 pt12116sl 0.33 80 796.0 2.30 4.0 200 pt12117sl 0.39 80 796.0 2.10 4.0 200 pt12118sl 0.47 80 796.0 1.90 4.0 200 pt12119sl 0.56 80 796.0 1.70 4.0 200 pt12120sl 0.60 80 796.0 1.60 4.0 200 pt12121sl 1.00 90 252.0 1.30 6.0 150 pt12123sl 1.20 90 252.0 1.20 9.0 150 pt12124sl 1.50 90 252.0 1.10 9.0 150 pt12125sl 1.80 90 252.0 1.00 9.0 100 pt12126sl 2.20 90 252.0 0.90 13.0 100 pt12127sl 2.70 90 252.0 0.80 13.0 100 pt12128sl 3.30 90 252.0 0.70 13.0 100 pt12129sl 3.90 90 252.0 0.70 13.0 50 pt12130sl 4.70 90 252.0 0.60 18.0 50 pt12131sl 5.60 90 252.0 0.60 18.0 50 pt12132sl 6.80 90 252.0 0.50 26.0 50 pt12133sl 8.20 90 252.0 0.50 26.0 50 pt12134sl 10.00 100 79.6 0.40 40.0 40 pt12135sl 12.00 100 79.6 0.40 40.0 40 pt12136sl 15.00 100 79.6 0.40 60.0 40 pt12137sl 18.00 100 79.6 0.30 60.0 30 pt12138sl 22.00 100 79.6 0.30 80.0 30 pt12139sl 27.00 100 79.6 0.30 80.0 30 pt12140sl 33.00 100 79.6 0.30 80.0 30 notes: (1) version j: inductance value ? % is also available. please insert ??after ??in part number if inductance value ? % is required (i.e. pt12110sjl). (2) measurements are made at 25 ? using hp4277a lcz meter self resonant frequency is for reference only. full encapsulated units with epoxy resin are also available. please consult factory for details. 1 2 schematic general specifications terminal..........................................cu/sn operating temperature range ...................................-20 c to +80 c storage temperature range ...................................-25 c to +85 c
|
